Utp Lan
2010
 |
 VGA UTP LAN Ethernet RJ45 CAT5e CAT6 Extender Repeater Splitter 300M 1000ft $89.95 Time Remaining: 22d 12h 30m Buy It Now for only: $89.95 |
 HDMI TO Cat5 Cat6 UTP AV Enthernet LAN Extender Adapter $49.99 Time Remaining: 23d 23h 35m Buy It Now for only: $49.99 |
Utp Lan
Fast Ethernet: Your Gateway To The Fastest Connection Available
Have you ever heard of fast Ethernet? Allow us to introduce you to one of the fastest Internet speeds available today. The ordinary Ethernet has a speed of only ten megabytes per second, and the fast Ethernet surpasses that. Amazing isn't it? The ordinary Ethernet is known as 10Base-T, referring to its speed per second, the new and improved is now called 100Base-T. Let me tell you more about it.
If you are working in a company or if you own one, you are probably familiar with the term LAN, or Local Area Network. This is the network which you connect to, allowing you to gain access to important information which is necessary for your daily office work. Once you attach the cable to the port, you get instant access to the office network. But LAN wasn't always as fast as Fast Ethernet. Let us take a look at the evolution in order to understand more about it.
The first LAN connections were really slow, as slow as two megabytes per second. This was due to the material used for the cable. They were using coaxial cables back then, which did not really give out good results when it comes to speed. They basically set up a few computers that were interconnected in a network, which is called LAN.
Then the UTP wires came. As technology improved, more advancement in LAN connectivity was discovered. People found more ways to increase the speed of the connection. This time, they found it through the twisted UTP cable. Their twisted feature allows it to be able to be bent and manipulated in any way possible. Its cables were so thin that it was easy to fit them in really small spaces and corners.
More changes took place for the better, and the hub connection came. Hubs now replaced the drops sent from the cables; they were now interconnected through hub ports. Although the system did not change much, people preferred this back then.
The first ever Ethernet that took LAN by storm was the 10Base-T network or Ethernet LAN. It dramatically increased the speed to a whooping ten megabytes per second. But as companies grew and their needs changed, the need for more speed came, and people had to look at the Ethernet as nothing but a slow connection.
Giving out a speed of 100 megabytes per second, the speed really improved and satisfied everyone's need for a faster connection. The innovations were such a breakthrough that most companies are still using Fast Ethernet today.
Today, there are more innovations that can surpass the speed of the Fast Ethernet. There are plenty of things to watch out for, especially since companies are planning to get increased speeds. If you want a faster speed connection for your company, ask your service provider about the best speed available today or ask them about what truly fits the needs of your company. You might not need the fast speed and you could be wasting money on really high LAN connections. Fast Ethernet can change the LAN speed connection of your company but be sure that you really need it.
About the Author
Are you looking to find more information on
Fast Ethernet
to allow you to surf the net at a faster speed? Visit our website to find out more!
So why are you hesitating? Visit our website to find out where you can find the best deal on
Fast Ethernet
for your internet web surfing needs.
Remote PC Networking through UTP Cat6 Cable?
I have a remote office 650 feet far from my main terminal. Can i get connect my remote office with UTP Cat-6 cable. I think it is not possible because UTP support not more than 300 feet. Please confirm me if i place a 8 port LAN switch in between 650feet ( i mean after 325feet) can it be helpful to connect my remote Office from my main terminal?
If no.. what will be the cheapest alternative?
Thank you in advance.. .
awaiting...
Assuming measurements are accurate yes this should work fine - 325 ft is 99 metres so you are under limit, just. However, the limit is a fairly hard one - there is not much scope for drifting over the 100 metre limit and still having the network function, since timings are pretty tight for the collision system to work properly even at 100m. Also it is a matter of bad style: general guidelines are that fixed wiring should be no more than 90m long to allow for 5m of patch cabling at either end.
As a result I would strongly suggest splitting the link into three segments rather than two, or going to a different technology - a single fiber link for that distance is not going to be ridiculously expensive.
CQ092-RJ45 RJ11 RJ12 CAT5 UTP Network USB LAN Cable Tester
