Eprom Programmer
2010
 |
 USB Universal EPROM EEPROM FLASH GAL Programmer AVR PIC $39.99 Time Remaining: 6d 18h 15m Buy It Now for only: $39.99 |
Eprom Programmer
What is the function of BeePROG Universal Programmer?
BeePROG Universal Programmer
Short description:
--33901 supported devices by 2.42 version of SW (13. Sep. 2007)
--extremely fast programming, one of the fastest programmers in this category. Programs 16-Mbit Flash memory less than 18 seconds
--48-pins powerful pindrivers, no adapter required for any DIL devices
--connector for in-circuit programming (ISP)
--dual connection to PC: USB or parallel (printer) port
--USB 2.0/1.1 compatible interface
--alternatively high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface
--comfortable and easy to use control program, Windows 95/98/Me/NT/2000/XP/2003/XPx64 compatible
--Multiprogramming possible by attaching more programmers to one PC
--warranty - 3 years
Specification
HARDWARE
Base unit, DACs
--USB 2.0 port
--FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate
--on-board intelligence: powerful microprocessor and FPGA based state machine
--three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
--VCCP range 0..8V/1A
--VPP1, VPP2 range 0..26V/1A
--autocalibration
--selftest capability
--protection against surge and ESD on power supply input, parallel port connection
ZIF socket, pindriver
--48-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 48-pin
--pindrivers: 48 universal
--VCCP/VPP1/VPP2 can be connected to each pin
--perfect ground for each pin
--FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
--analog pindriver output level selectable from 1.8 V up to 26V
--current limitation, overcurrent shutdown, power failure shutdown
--ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
--continuity test: each pin is tested before every programming operation
ISP connector
--10-pin male type with missinsertion lock
--5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices.
--1x VCCP voltage (range 2V..7V/100mA), can be applied to pins 1, 3
programmed chip voltage (VCCP) with both source/sink capability and voltage sense
--1x VPP voltage (range 2V..25V/50mA), can be applied to pins 2,3,4,6,8,10
--target system supply voltage (range 2V..6V/250mA)
DEVICE SUPPORT
Programmer, in ZIF socket
--EPROM: NMOS/CMOS, 2708*, 27xxx and 27Cxxx series, with 8/16 bit data width, full support for LV series
--EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width
--Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx --series, from 256Kbit to 32Mbit, with 8/16 bit data width, full support for LV series
Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 45Dxxx, 59Cxxx, 25Fxxx, 25Pxxx, 85xxx, 93Cxxx, NVM3060, MDAxxx series, full support for LV series
--Configuration (EE)PROM: XCFxxx, XC17xxxx, XC18Vxxx, EPCxxx, AT17xxx, 37LVxx
--1-Wire E(E)PROM: DS1xxx, DS2xxx
--PROM: AMD, Harris, National, Philips/Signetics, Tesla, TI
--NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series
--PLD: Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX7000AE
--PLD: Lattice: ispGAL22V10x, ispLSI1xxx, ispLSI1xxxEA, ispLSI2xxx, ispLSI2xxxA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, LC4xxxB/C/V/ZC, M4-xx/xx, M4A3-xx/xx, M4A5-xx/xx, M4LV-xx/xx
--PLD: Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
--other PLD: SPLD/CPLD series: AMI, Atmel, AMD-Vantis, Gould, Cypress, ICT, Lattice, NS, Philips, STM, VLSI, TI
--Microcontrollers 48 series: 87x41, 87x42, 87x48, 87x49, 87x50 series
--Microcontrollers 51 series: 87xx, 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, all manufacturers, Philips LPC series
--Microcontrollers Intel 196 series: 87C196 KB/KC/KD/KT/KR/...
--Microcontrollers Atmel AVR: AT90Sxxxx, ATtiny, ATmega series
--Microcontrollers Cypress: CY8Cxxxxx
--Microcontrollers ELAN: EM78Pxxx
--Microcontrollers MDT 1xxx and 2xxx series
--Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, dsPIC series
--Microcontrollers Motorola (Freescale): 68HC05, 68HC08, 68HC11 series
--Microcontrollers Myson MTV2xx, 3xx, 4xx and 5xx series
--Microcontrollers National: COP8xxx series
--Microcontrollers NEC: uPD78Fxxx series
--Microcontrollers Scenix (Ubicom): SXxxx series
--Microcontrollers SGS-Thomson: ST6xx, ST7xx, ST10xx series
--Microcontrollers TI: MSP430 and MSC121x series
--Microcontrollers ZILOG: Z86/Z89xxx and Z8xxx series
--Microcontrollers other: EM Microelectronic, Fujitsu, Goal Semiconductor, Hitachi, Holtek, Princeton, Macronix, Winbond, Infineon(Siemens), Samsung, Toshiba, ...
Programmer, through ISP connector
--Serial E(E)PROM: IIC series, MW series, SPI series, KEELOQ series, serial data Flash, PLD configuration memories
--Microcontrollers Atmel: AT89Sxxx, AT90Sxxxx, ATtiny, ATmega series
--Microcontrollers Cypress: CY8C2xxxx
--Microcontrollers Elan: EM78Pxxx, EM6xxx series
--Microcontrollers EM Microelectronic: 4 and 8 bit series
--Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, PIC18xxx, dsPIC series
--Microcontrollers Motorola/Freescale: HC11 series, HC908 series (both 5-wire, All-wire)
--Microcontrollers NEC: uPD7xxx series
--Microcontrollers Philips: LPC2xxx series, LPC series, 89xxx series
--Microcontrollers Scenix (Ubicom): SXxxx series
--Microcontrollers TI: MSP430 (both JTAG and BSL series), MSC12xxx series
--PLD: Lattice: ispGAL22xV10x, ispLSI1xxxEA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, M4-xx/xx, M4LV-xx/xx, M4A3-xx/xx, M4A5-xx/xx, LC4xxxB/C/V/ZC
--Various PLD (also by JAM player/JTAG support):
Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX 9000, MAX II
Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
More details, please visit http://iautotool.com/beeprog-universal-programmer-p-120.html
IAutotool.com, a professional car diagnostic tools wholesale online store, is the official site of IAutotool, Co.,Ltd, a leading auto tools manufacturer from Shenzhen China. We specialize in high quality OBD Tools, Professional Diagnostic Tools, Code Scanners, ECU Chip Tunning Tool, Auto Key Programmers, Airbag Reset Kits, Odometer Correction Kits and so on.
Everyone expects to get good product for what he/she paid, So quality is always one of buyer's biggest concern prior to buying. Only providing qualified Car Tools is our solemn promise. Just good products are not enough. Excellent technical support is also vital to buyers. IAutotool has been dedicated to Car tools sales since foundation, and has rich experience in solving possible problems buyer may encounter. Each item shipped out from Iautotool are carefully checked by a responsible QA team before packing. They will check the performance of every function. Real pictures taken from the items are the best explanation. So you can feel reliability here.
About the Author
IAutotool.com, a professional car diagnostic tools wholesale online store, is the official site of IAutotool, Co.,Ltd, a leading auto tools manufacturer from Shenzhen China. We specialize in high quality OBD Tools, Professional Diagnostic Tools, Code Scanners, ECU Chip Tunning Tool, Auto Key Programmers, Airbag Reset Kits, Odometer Correction Kits and so on.
Everyone expects to get good product for what he/she paid, So quality is always one of buyer's biggest concern prior to buying. Only providing qualified Car Tools is our solemn promise. Just good products are not enough. Excellent technical support is also vital to buyers. IAutotool has been dedicated to Car tools sales since foundation, and has rich experience in solving possible problems buyer may encounter. Each item shipped out from Iautotool are carefully checked by a responsible QA team before packing. They will check the performance of every function. Real pictures taken from the items are the best explanation. So you can feel reliability here.
