Button Dss
2010
 |
| No items matching your keywords were found. |
Button Dss
Cordless phones - No wires anymore
Basically phones are the medium with the help of which you can be connected with your loved ones. And communicate to them any time. No matter what the distance. The Cordless phones are the replacement of wired telephones. These phones work on very high frequency so that you can have the uninterrupted conversation. In this there are two things one is the base station and other is the receiver unit. The base unit is used to charge the receiver unit after every 24 hours which requires electricity to power it. With the wired home phones there was no freedom of walking or moving while talking. But with the cordless phones you are free to move anywhere within your house and can talk without any hassle regarding the conversation. The only thing which is to keep in mind you should not go beyond 100 meters otherwise you will not be able to hear properly as there will be frequency problem between the base station and the handset.
If you are interested to buy these phones you should buy them with full accuracy because they can interfere with your high frequency home appliances like microwave oven, Bluetooth handset etc. These Dect phones can be purchased from any of the online and or the offline store. The main reason behind the popularity of these Cordless phones is they are with awesome clarity within the range. And they are with some other good things like the Big buttons to dial the number, flashing lights etc. For Cordless phones the frequency bands are available for each country. The factors which affect the performance of these phones are antenna quality, modulation method, signal strength etc.
You can judge the good quality of the Dect phones by acknowledging this thing that whether the phone is the audio signal with the least Interference at the greatest possible range or not. The spectrum works behind this is the Digital Spread Spectrum in which the concept of frequency hopping is used. In which the audio signal is spreader in a pseudorandom manner. In DSS there is a noise burst to the analog receiver which can be acknowledged by the base unit which is with the same number of pseudorandom generator as the cordless handsets. Whenever the receiver is put into the base station a new and different generator is chosen from the available option.
About the Author
Dennis Jaylon is a renowned business writer who has years of experience in writing technical reviews, product descriptions and product feature analysis of technical gizmos like Dect phones. He has won appreciation especially for enlightening people about the latest communication gizmos,cordless phones,Siemens phones,Dect phones, headsets, Telephones , Panasonic phones, Siemens gigaset and Home phones.
Panasonic KX-TG6502B 5.8 GHz 2 Line Cordless Phone 2nd Line Problem?
Panasonic KX-TG6502B 5.8 GHz DSS Expandable 2-Line Cordless Phone with Dual Handsets (Black)
I have this type of phone -- 1 cordless handset that sits in the base station and 1 cordless handset that sits in the substation.
The problem is that the 2nd line (I have 2 separate phone lines in the house) does not have a dial tone on either cordless phone, cannot be called out / dialed out from, and is lit up all the time on the base station.
BUT when I go to a corded phone in the house and pick up the 2nd line, I get a dial tone and can call out no problem.
Also, I believe that when I pick up the cordless phone it defaults to the 2nd line until I hit the button for the 1st line on the cordless phone.
The jacks for the cordless phones have always been 2 line jacks.
The phone lines from the base station / sub station are 2 line lines.
And the phones have worked fine as 2 line phones in those jacks for at least 2 years.
So that is not the problem.
have you plugged your corded 2 line phone into the jack that the cordless bass is connected to? it is possible that the jack is not wired for 2 lines....
check the line cord for the cordless phone... there should be 4 pins at the tip that plugs into the jack/phone... if there are only 2 pins then the cord is only for a single line...
Recall button - new DSS building phones
